Is the thicker the door and window aluminum, the better?
In our daily consumption, I believe that many people believe that: The higher the price of a
commodity, the thicker the material and the better the quality... Because the more materials that are consumed, the higher the cost, and the quality is beyond doubt.
However, not all commodities can be defined in this way. For example, aluminum alloy doors and windows, the thickness of their products is not based on the specification of a smaller wall thickness, but based on the size of the doors and windows, the wind pressure value and the design of the doors and windows airtight, watertight Sexual requirements selected. In the case of guaranteeing product performance, safety and other requirements, the thicker the wall of the door and window profile, the better the product quality.
To judge the quality of aluminum alloy doors and windows, we must start from the following points
1. Is the profile design reasonable?
2. Whether the airtightness and watertightness of doors and windows are up to standard
3. How to configure the hardware, glass, and accessories of doors and windows.
If a door and window, its profile design is not reasonable, watertightness and airtightness is not up to standard, even if its wall thickness exceeds the national standard N times, it is not a good product. At the same time, excessive pursuit of the aluminum alloy wall thickness will cause unnecessary waste to the country, and excessively thick profiles will inevitably lead to excessively high prices and increase consumer spending.
